The starter set for C-track comes with detailed documentation using a sample layout . The other starter sets are structured similarly but are optimized for different track systems or gauges, so the documentation largely applies to them as well.
The starter sets each include a loco module, a turnout module, and a WiFi router. With the respective "starter set without router," they can be expanded to the original scope (2 locos and 2 turnouts).
If you want to use your own WiFi, choose the "starter set without router."
CTC starter set N/TT gauge
Contents:
- The CTC control app
- A ready-to-use CTC-Router-FB 4050 (unrestricted for later full operation)
- 1 CTC-Loco-Module S3 for locos
- 1 CTC-Turnout-Module for 1 turnout and 1 signal with double-coil drive
- 1 CTC-IR receiver diode , one per loco equipped with train control
- 2 CTC-IR balise kits for N/TT gauge each with 4 IR LEDs, 1 kOhm resistor, PCB
CTC starter set C-track
Contents:
- The CTC control app
- A ready-to-use CTC-Router-FB 4050 (unrestricted for later full operation)
- 1 CTC-Loco-Module-21mtc or CTC-Loco-Module-M3 for locos
- 1 CTC-Turnout-Module for 1 turnout and 1 signal with double-coil drive
- 1 CTC-IR receiver diode , one per loco equipped with train control
- 2 CTC-IR balise kits each with 5 IR LEDs, 1 kOhm resistor, PCB
- 2 TVS diodes to protect the CTC modules from overvoltage
As accessories, you can also obtain a conversion kit for analog locos, as well as an adapter PCB to plug the CTC-Loco-Module-21mtc into them.
CTC universal starter set
Contents:
- The CTC control app
- A ready-to-use CTC-Router-FB 4050 (unrestricted for later full operation)
- 1 CTC-Loco-Module-21mtc or CTC-Loco-Module-M3 for locos
- 1 CTC-Turnout-Module for 1 turnout and 1 signal with double-coil drive
- 1 CTC-IR receiver diode , one per loco equipped with train control
- 2 CTC-IR balise kits each with 5 IR LEDs, 1 kOhm resistor, PCB
- 2 TVS diodes to protect the CTC modules from overvoltage
As accessories, you can also obtain a conversion kit for analog locos, allowing the CTC-Loco-Module-PluX22 to be plugged into them.
Starter set G2 3.5A (indoor)
Contents:
- The CTC control app
- The ready-to-use CTC-Router-FB 4040 (unrestricted for later full operation)
- 1 CTC-Loco-Module G2 with 3.5 A peak, for gauge 0 to LGB
- 1 CTC-Turnout-Module G2 (indoor) including terminals and housing
- 1 NFC reader
- 2 NFC balises to be mounted on the sleeper
- 2 TVS diodes to protect the CTC modules from overvoltage
Expansion set G2 3.5A (outdoor)
Contents:
- The CTC control app
- 1 CTC-Loco-Module G2 with 3.5 A peak, for gauge 0 to LGB
- 1 CTC-Turnout-Module G2 (outdoor) including terminals and housing
- 1 NFC reader
- 2 NFC balises to be mounted on the sleeper
- 2 TVS diodes to protect the CTC modules from overvoltage
Service
In addition to the offered starter sets, we can also assemble a customized set for you.